THIN FILMS

EVAPORATED THIN FILMS AND COATINGS

Lebow Company deposits electron beam evaporated thin films for numerous applications including impurity injection targets of a wide range of materials.  Films and targets from a few Angstroms to over 10 microns, in single and multi-layers, have been supplied to laboratories worldwide.  The following price list covers the most often requested films and targets on microscope slides, 2 inch nominal squares (1.925 inch, 49mm) or on most customer supplied substrates.

The price list covers cleaning and coating of up to 12 customer supplied substrates within a 200 x 195mm area.  Substrates of 2 inch x 2 inch nominal (49mm), 12 per lot, 1 inch x 3 inch microscope slides, 12 per lot, or 2 inch x 3 inch microscope slides, 8 per lot are supplied at no charge.  Other substrate materials can also be supplied and we would be pleased to quote your special requirements.  We are able to coat cylinders, rods, the edges of discs, wires (including microwires) and plastics.

In addition to the run fee below, add a set-up fee below of $150.00 per material (except Al and Au).

LEGEND for symbols used in list below:

N2 Bag – Dry Nitrogen Bag out  of system and hermetic packing required: $650.00 each run

C – Clean up fee of $400.00

CC – Clean up fee of $800.00

T – Toxic Fee of $400.00

+ – Plus cost of material per micron

Al

WordPress Responsive Table

Al2O3

WordPress Responsive Table

Ag

WordPress Responsive Table

As

WordPress Responsive Table

Au

WordPress Responsive Table

B

WordPress Responsive Table

Be

WordPress Responsive Table

Bi

WordPress Responsive Table

C

WordPress Responsive Table

CaF2

WordPress Responsive Table

Cd

WordPress Responsive Table

 

CdTe

WordPress Responsive Table

Co

WordPress Responsive Table

Cr

WordPress Responsive Table

Csl

WordPress Responsive Table

Cu

WordPress Responsive Table

Fe

WordPress Responsive Table

Ge

WordPress Responsive Table

Gd

WordPress Responsive Table

Hf

WordPress Responsive Table

In

WordPress Responsive Table

Ir

WordPress Responsive Table

ITO

WordPress Responsive Table

KCl

WordPress Responsive Table

KF

WordPress Responsive Table

Kl

WordPress Responsive Table

LiCl

WordPress Responsive Table

LiF

WordPress Responsive Table

Mg

WordPress Responsive Table

MgF2

WordPress Responsive Table

Mn

WordPress Responsive Table

Mo

WordPress Responsive Table

Na

WordPress Responsive Table

NaCl

WordPress Responsive Table

NaF

WordPress Responsive Table

Nb

WordPress Responsive Table

Nd

WordPress Responsive Table

Ni

WordPress Responsive Table

Pb

WordPress Responsive Table

Pd

WordPress Responsive Table

Pt

WordPress Responsive Table

Re

WordPress Responsive Table

Rh

WordPress Responsive Table

Ru

WordPress Responsive Table

S

WordPress Responsive Table

Sb

WordPress Responsive Table

Sc

WordPress Responsive Table

Se

WordPress Responsive Table

Si

WordPress Responsive Table

SiOx

WordPress Responsive Table

 

SiO2

WordPress Responsive Table

Sn

WordPress Responsive Table

SnO3

WordPress Responsive Table

 

Ta

WordPress Responsive Table

Te

WordPress Responsive Table

Th

WordPress Responsive Table

Ti

WordPress Responsive Table

TiO2

WordPress Responsive Table

V

WordPress Responsive Table

W

WordPress Responsive Table

Y

WordPress Responsive Table

Yb

WordPress Responsive Table

Zn

WordPress Responsive Table

ZnS

WordPress Responsive Table

Zr

WordPress Responsive Table

Extra Substrates – $15.00 each to the capacity of coating area of chamber.
Multiple layers – Add 1/2 of the least expensive layer prices for 2nd and 3rd layer.
Hermetic Packaging – $150.00

Deposition Masks:

Clean and first set-up (one time) $150.00/mask
Loading clean masks $15.00/substrate ($100 max)
Aligning masks by hand $30.00/mask                                                                                                                                                                                                                              Tape masking $25.00 each
Deposition thru masks (2nd and following $10.00 each runs with clean, previously set up masks)
Rotation of Substrates (e.g. Coating cylinders or rods) prices starting at: $350.00  for fixture set-up

Delivery 4-8 weeks